2-shelf trolleys

- Stainless steel structure AISI 304 - ABS upper top with extended up rims on three sides - Lateral push handle - Drawer with automatic shutting system, 110% total opening. Drawers front colour: red, blue, purple, white, lightgreen ...

TECHNICAL CHARACTERISTICS - MULTIFUNCTIONAL HOSPITAL TROLLEY - Aluminium and epoxy steel coating structure - Upper MDF board laminate - Epoxy steel coating lower shelf - High impact ABS base - ...

TECHNICAL CHARACTERISTICS - MULTIFUNCTIONAL HOSPITAL TROLLEY - Aluminium and epoxy steel coating structure - Upper MDF board laminate - Epoxy steel coating lower shelf - High impact ABS base - ...

Service carts for medical equipment with vertical structure made from anodized light alloy. The drawers are made from painted steel sheet while the shelves are made from AISI 304 stainless steel. The moulded drawer fronts ...

Service carts for medical equipment with vertical structure made from anodized light alloy. The drawers are made from painted steel sheet while the shelves are made from AISI 304 stainless steel. The moulded drawer fronts ...

... harmonious environments and improve the experience of patients and operators. LINKAR medication trolley, 45 cm drawers, upper accessory-holder structure with 2 large stainless steel shelves.

... environments and improve the experience of patients and operators. LINKAR medicine distribution trolley, 60 cm drawers, with upper accessory-holder structure and 2 large stainless steel shelves.

... medical trolley is always a great choice. Whether transport purposes of medical, storage, or simply as assistant for your procedures, medical trolley Promotal answer all your expectations. The stainless ...

... different models of medical trolley square tubes, depending on the size of the table, and the number and the deck type. A rounded edge medical trolley is also available on our website. Standard ...

Size : 730mm(L)*470mm(W)*975mm(H) 1. lateral side with pushing handle, two decks with guard rails; 2. Base with dia.100mm castors, two of them with brakes 3. Finish with bumpers device on each corner 4. Freight ...

Size 1: 720mm(L)*460mm(W)*975mm(H) 1. with two ABS engineering plastic decks 2. Base with dia.100mm castors, two of which with brakes 3. Freight saving knock-down construction.

600*650*1050mm Certifications: CE, ISO The MGE-MYB1 Portable Monitor Cart is designed to accommodate medical equipment such as ECG monitors, infusion pumps, and other essential devices. Its robust construction and ...

643×633×863mm Certifications: CE, ISO The MGE-MYB2 Endoscopic Cart is designed for the secure placement and mobility of endoscopic equipment, ECG monitors, infusion pumps, and other essential medical ...

... steel, bent : 25 mm 4 swivel castors : 125 mm, 2 with brakes, polyamide clevis, with plastic bumpers Deep-drawn trays with rounded corners, screwed to 25 mm hoops Maximum load per tray: 80 kg Trolley ...

Elements with compact and elegant lines, these units on wheels are the best solution to optimize the space inside the dental cabinet; they are equipped with different kind of top with handle to better change their position in the work ...

Characterized by a sober and essential line, the ZILFOR trolleys are both practical furnishing accessories and handy work elements for dentists and assistants. Moreover, they are a rational solution for those small organizational ...

Characterized by a sober and essential line, the ZILFOR trolleys are both practical furnishing accessories and handy work elements for dentists and assistants. Moreover, they are a rational solution for those small organizational ...

Trolley with 2 shelves & 2 drawers side by side A service trolley entirely made of AISI304 stainless steel. 4 stainless steel drawers are available underneath the ...

Trolley with 2 shelves & 2 drawers side by side Service trolley entirely made of AISI304 stainless steel. 2 stainless steel drawers are available ...

Trolley with 2 shelves & 2 drawers Service trolley entirely made of AISI304 stainless steel. 2 stainless steel drawers are available underneath ...

With Scotch-brite finish completely welded with semirobotic TIG process on all junction points to avoid infiltration and/or dirt deposit, ensuring perfect hygiene and disinfection. No sharp edges and/or corners to ensure safety of operators.

With Scotch-brite finish completely welded with semirobotic TIG process on all junction points to avoid infiltration and/or dirt deposit, ensuring perfect hygiene and disinfection. No sharp edges and/or corners to ensure safety of operators.

With Scotch-brite finish completely welded with semirobotic TIG process on all junction points to avoid infiltration and/or dirt deposit, ensuring perfect hygiene and disinfection. No sharp edges and/or corners to ensure safety of operators.

... compatible stainless steel trolley with 2 shelves and 4 drawers/ MR conditional to 1.5T and 3.0T Main features: 1, This MR compatible trolley is specially designed for use in MR ...

... Coil Transport Trolley was commissioned by a Hospital and is MR Conditional to 1.5T and 3.0T MR system. It has lockable rolling castors and can safely transport coils to and from an MRI suite. The MRI compatible coil ...

Two shelves with tray shape with dimensions 680 x 420 mm. Rounded corners with no sharp edges. One drawer useful area of the drawer: 600 x 400 x 100 mm Handle for easy movement. Structure made of stainless steel, quality 18/10. ø80 ...

Two shelves with tray shape with dimensions 680 x 420 mm. Rounded corners with no sharp edges. Two drawers useful area of the drawer: 270 x 400 x 100 mm Handle for easy movement. ø80 mm castors with bumpers, two of them with brake. Structure ...

... ABS plastic white colour. The inner structure and shelves are manufactured in stainless steel 18/10 The multifunctional trolleys Hidemar serie 700, offer several configuration possibilities, which are completed with ...

with two manoeuvring handles double-leaf hinged door (openning angle – 270°) with rubber gasket and lock two adjustable shelves (additional shelves on request) castors with diameter 160 mm (two of them with brakes) non-smudging ...

trolley with one drawer in upper part and two fixed shelves the drawer on ball bearing slides, full-extension, self-closing height of the drawer: – exterior: 150 mm – interior: 110 mm distance between shelves 240 ...

... lower part of trolley distance between shelves and between shelf and drawer: 420 mm the drawer on ball bearing slides, full-extension, self-closing flat shelves height of the drawer: – exterior: ...

... equipment options and colors. This gives you the freedom to configure your car as you wish. Depending on your needs, the trolleys can be equipped with the necessary accessories. Our product advisors in the office and ...

- 2 shelves with inner lining 800 x 500 mm - max. weight capacity per shelf: 40 kg - 4 special designed swivel castors 2 with double stop, diameter: 125 mm Housing: ...

... construction - 3 shelves with inner lining 1000 x 600 mm - max. weight capacity per shelf: 80 kg - 4 special designed swivel castors 2 with double stop, diameter: 125 mm Housing: ...

Cart Document holder Convimed for transportation of medical records The cart is robust and lightweight resistant to all chemicals used in hospital settings Shutter door with side opening Lock with ...

The equipment trolley or auxiliary cart is a mobile element of great utility in any hospital or clinic, ideal for transporting all types of equipment and medical supplies thanks to its ...

... Shape Instrument Trolley With Casters Model: MK-S02 Overall Size: 120*46*86.5cm Load Capacity: 40kg Product Details Main features : Sturdy construction With 5 universal casters (2 ...

... YA-040 Stainless Steel Transport Cart Trolley Features 2 shelf utility cart comes with 2 solid Stainless Steel shelves Solid ...

... 700*450*750mm Main features Nesting / stackable trolley There are three trolleys in one set The trolley is constructed with stainless steel material Safety folds to all edges One ...

The Agily® 400 x 400 dressing trolley with compact laminate shelves is adaptable and can be equipped for different uses. Many accessories are compatible with this product which is completely customizable. Its innovative ...

Inner compartment equipped with 2 stainless steel shelves.

... work flap provides a work area at height 930mm (max load 2.0kg) Lower shelf Five tier plastic rack (395mm) Two slide out storage / waste bins 100mm pressed steel castors When not in use, trolley ...

Suitable for the transportation of bulk case notes & x-rays Records stored in two removable boxes Clearance between upper & lower boxes, 235mm Max capacity per box - 25kg 80mm ring buffers fitted to front of unit 125mm pressed steel ...

Unique 'two' trolley system, suitable for the transportation of bulk case notes & x-rays Records stored in fixed boxes, each supplied with an adjustable divider Clearance between upper & lower boxes - 87mm Trolleys ...

... castors 75 mm Ø, 2 of these locking, conductive castors 4 bumpers DIMENSIONS width 610 x depth 450 x height 1,000 mm SHELVES (OPTIONAL) transport cart with 4 shelves transport cart ...

... frame construction made of steel white epoxy coated 2 steel shelves plastic corner connectors 2 standard size rails mounted on sides1 for mounting accessories CASTORS 4 swivel castors 75 mm Ø, ...

Fixed hooking device between 312 CR and 3950 CR. AISI 304 stainless steel realization. Delivered disassembled.

... and lid. 2 vertical push-handles on each short side. Strong non-twisting bottom frame in AISI 304 stainless steel. PE buffer on bottom. 2 fixed and 2 swivelling wheels dia. 160 mm with ...

... tubular profiles, anodized (10 micron). 2 shelves. Completely welded without cutting edges. Circular bumpers at the corners. 4 swivelling wheels dia. 100 mm with non-marking rubber ring and zinc-plated housings. Shelf ...