Metallic arthrodesis plates

Length: 21, 80 mm
Number of holes: 8, 4 unit

Anterior Cervical Locking Fixation System (VI) Application: For anterior cervical internal fixation

Length: 22, 72 mm

System Pre-bended plates with locking system Self-tapping and self-drilling screws 4 different screw sizes and 2 diameters Advantages Locking system in the plate Intuitive instrumentation Fixation ...

... individually is possible. Advantages - Comprehensive plating System - Two plates and three screw styles offer distinct implant combinations - One intuitive instrument set - Thin 2 mm plate design - ...

... cervical plating system. Advantages - Extremely flat plate design - Special screw design reduces the likelihood of screw "Back-Out" - Fast screw insertion due to selftapping profile - Prebent lordotic plate ...

... Features - Self-locking screws - Oversized revision screws - Plate marking for easier plate size selection and placement - E-Plate (Extension to the existing ABC plate) - ...

Length: 22, 30, 32, 50, 71 mm
Thickness: 1.8 mm
Number of holes: 4, 6, 8 unit

Anterior Cervical Plate-II System - Low profile design, plate thickness is 1.8mm - Unique observing window on the plate, helps checking the implant status - Screws on the coronal ...

... Locking Fusion Plate T47982 - VA TMT (Tarsometatarsal) Locking Fusion Plate T47983 - VA Opening Wedge Variable Angle Locking Plate T47984 - VA First MTP (Metatarsophalangeal) Locking ...

Number of holes: 5, 6 unit

Metatarsophalangeal Joint Fusion Plate I Product Introduction 1.Anatomic design, 9° dorsal flexure, and 11°extorsion, to avoid effect on the plate strength while it is bendedduring surgery. 2.Plate ...

Number of holes: 4 unit

Metatarsophalangeal Joint Fusion Plate II Product Introduction 1.Anatomic design, 9° dorsal flexure, and 11°extorsion, to avoid effect on the plate strength while it is bendedduring surgery. 2.Plate ...

Number of holes: 4 unit

Metatarsal Cuneiform Joint Dorsal Plate Product Introduction 1.Anatomic design is good for reduction, and no need to pre-bend the plate duringsurgery. 2.Plate and screw are designed ...

... visible on imaging . LARGE CENTRAL WINDOW The large central window of the Mecta-C Plate: enhances the graft visibility allows proper positioning of the plate facilitates the bone growth assessment

Length: 118, 102 mm
Thickness: 3.5 mm

345.1330340.15 - Ø3.5/Ø4.5/Ø5.5//Ø6.5 Anterior Ankle Fusion VA-LCP(AA-TT),Short,Left 345.2330340.15 - Ø3.5/Ø4.5/Ø5.5//Ø6.5 Anterior Ankle Fusion VA-LCP(AA-TT),Short,Right 345.1330440.15 - Ø3.5/Ø4.5/Ø5.5//Ø6.5 Anterior Ankle Fusion VA-LCP(AA-TT),Long,Left 345.2330440.15 ...

Length: 102, 118 mm
Thickness: 3.5 mm

345.1200340.15 - Ø3.5/Ø4.5/Ø5.5//Ø6.5 Posterior Ankle Fusion VA-LCP(PA-TTC),Short Left 345.2200340.15 - Ø3.5/Ø4.5/Ø5.5//Ø6.5 Posterior Ankle Fusion VA-LCP(PA-TTC),Short Right 345.1200440.15 - Ø3.5/Ø4.5/Ø5.5//Ø6.5 Posterior Ankle Fusion ...

Length: 42, 47, 61, 72 mm

... First MTP Fusion VA-LOC Plate 365.1110042.15 - ￠2.7/￠3.5 First MTP Fusion VA-LOC Plate 0°,42mm,L 365.2110042.15 - ￠2.7/￠3.5 First MTP Fusion VA-LOC Plate 0°,42mm,R 365.1110542.15 ...

Length: 85, 20 mm
Number of holes: 4, 8 unit

... peripheral tissues, we must ensure the plate to be stabilized firmly, without the screw migration in the long term of activity. Therefore, an antimigration mechanism must be added into cervical plate ...

Length: 17, 53 mm
Thickness: 1.2 mm

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. TC20: ...

Hole diameter: 2.7 mm
Number of holes: 4, 14 unit

... Astrolabe’s Midfoot 2,7 is indicated for MP Joint 1 Arthrodesis and Revisions, MP Joint 1 Iliac Crest Arthrodesis, Metatarsal Arthrodesis and Lisfranc Arthrodesis, Interposition ...

Hole diameter: 3.5 mm

The Astrolabe’s Plantar plate is indicated for plantar Lapidus Arthrodesis as an evolved version of hallux valgus correction at certain angular degrees in order to prevent progression of arthrosis in ...

... fixation and is indicated for Keller-Brandes Revisions, MTP 1 lengthening arthrodesis, Revision after MTP 1 prosthesis and MT 1 lengthening osteotomy. This anatomically shaped plate allows facilitated ...

Thickness: 1.2 mm

• The plates are bended according to the bone’s natural shapes.

Thickness: 1.5 mm

• The plates are bended according to the bone’s natural shapes.

Thickness: 1.8 mm

• The plates are bended according to the bone’s natural shapes.

Length: 49, 192 mm

... the system offers 6 types of plates: -lateralTT-Tibiotalar andTTC-Tibiotalocalcaneal plates -anterolateral TT plates - posterior TT and TTC plates -anterior minimally ...

ACJ plate is intended for stabilization of the acromioclavicular joint in fresh injuries that occurred 7 up to 10 days before. The plate may be used as an alternative, in particular, for tension band ...

Number of holes: 6, 12 unit

... Concave profile • facilitated plate positioning • minimal bone removal • no intraoperative tilting of the plate Chamfered plate borders • minimized soft-tissue irritation Double ...

• Provide high strength with low thickness • Provide effective and simple use • Low profile (totally 2 mm) • Flexible blocking system securely to the screw

• Straight Plate ,self-locking screws, nuts and washers create a rigid fixation

Number of holes: 8 unit

Hand Carpus ( Arthrodesis ) Plate Ø 3,5 - Ø 4.0 mm screw

Number of holes: 20 unit

Elbow ( Arthrodesis ) Plate Ø 3.5 - Ø 4.0 mm screw

... types of Locking & Non-locking Screws available • Low profile Locking Plate • Φ1.1mm K-wire fixation hole • Easy positioning with Plate Holder • Two plate variations with 6 & 7 Hole Plates

ARIX Ankle System - Distal Tibia - Anterior Ankle Fusion Plate Anterior Ankle Fusion Plate • The anterior ankle fusion plate is indicated for use in anterior tibiotalar arthrodesis. • ...

Anterior Cervical Plate System The FlexWing Anterior Cervical Plate System is intended for anterior vertebral screw fixation of the cervical spine at levels C2-T1. The System is indicated for temporary ...

Number of holes: 6 unit

Can be used for one or more segments Quite thin plate No height on the plate

Anterior Cervical Plate System PROCTOPUS™ Prodorth Cervical Plate System is designed to meet the clinical expectations of anterior cervical surgery and it offers a wide range of plates ...

Length: 65, 25 mm
Number of holes: 8, 4, 6 unit

SOFEMED efficient, and mechanical tested systems for spine surgery according to European medical devices testing center.

... deformity or tumors on the request of the surgeon. Description : Resection and stabilization of the elbow with a titanium plate at the humerus and the proximal portion of the radius. Immobilization is inevitable ...

... complex fractures. Multidirectional locking Anatomical plate design Minimization of soft tissue irritation due to anatomical plate design K-Wire holes for preliminary plate fixation FLS ...

Polyaxial locking plates for corrective osteotomies, revision surgeries, arthrodeses and interposition arthrodeses of the first metatarsophalangeal joint Characteristics Anatomically pre-formed plate ...

From a surgical perspective, the plate allows for an easy posterolateral approach to the upper ankle joint and subtalar joint without affecting any major anatomical structures, less impairment of wound-healing Both joints ...

Thickness: 2 mm

... Characteristics Anatomically pre-formed plate design, usable on the right and left High primary stability thanks to Ø 2.5 mm and Ø 3.0 mm locking cortical screws Guide wire holes for temporary plate ...

... Pyrenees Constrained Cervical Plate System offers a low-profile design. Featuring SMARTLock Technology, the system does not require an additional locking mechanism, as each screw head forms an autogenic lock to the plate ...

Sternal Plates Titanium straight locking plates for sternal and rib-to-rib fixation. Titanium star-shaped and H-shaped plates for fixation of the manubrium. Release Pin Emergency ...

Streamlined instrumentation accommodates the needs of the patients and surgeons. CAM locking mechanism ensures locking of screws for optimal angles Audible, tactile and visual confirmations of locking mechanism provide confidence ...

... inserts and locks screws into place. Low Profile Design The plate has a low profile and smooth surface designed to help minimize esophageal irritation. Translational Plate Option Allows the plate ...

... between the plate and the bone. PLATES > 5 different plates : Anterolateral approach - anterolateral plates with 2 transfixation screws crossing the joint to optimize ...