Cemented acetabular prosthesis IP

Cemented implant for rapid postoperative mobilization Uniform cement coating by means of integral spacers Increased mobility by means of optimized cup design High UHMWPE quality means low abrasion LINK has decades of experience in the use of UHMWPE, and this was particularly valuable in the design of the cemented acetabular cups. The high quality of the polyethylene demonstrably minimizes abrasion suffered by the components, and thereby reduces the risk of osteolysis. Consequently, the incidence of component loosening is very low. In addition to the Standard UHMWPE, we also supply the system in acetabular cups made of X-Linked UHMWPE, This highly crosslinked polyethylene make it possible to achieve even lower abrasion levels. Another feature of the cemented polyethylene acetabular cups is the high cup rim, which projects beyond the spherical shape. The IP Acetabular Cup differs from the Lubinus Acetabular Cup in that this rim is beveled toward the inside. This gives the patient a wider range of mobility because the neck of the prosthesis strikes the cup rim later. In combination with the LINK LubinusSP II Femoral Stem, this system offers an outstanding, anatomically adapted cemented hip implant. The LINK IP Polyethylene Acetabular Cup is a cemented acetabular cup made of UHMWPE. The direct stability of the cup in the cement coating permits rapid postoperative mobilization of the patient. This, in turn, means shorter recovery times and shorter hospitalization for the patient