autopsy table / dissection / mortuary washing / rectangular
autopsy, dissection, mortuary washing
height-adjustable, stainless steel, with sink
The autopsy table is mounted onto a central support column and height-adjustable from 770 to 1070 mm.
The table is completely made of stainless steel (material no. 1.4301 – ANSI 304). Through a three-piece, removeable, perforated work top, all unsanitary vapors are safely vacuumed downwards. At the small side of the table you can slide in a body tray and close automatically with a cover.
A bath with Drainage channel is located under the perforated work surface. A seamlessly welded basin, 400 x 500 x 200 mm, with a surrounding profile border, an overflow pipe and a sieve insert is installed to the end of the table. All power connections, including the air duct, are built into the center support column an can be easily accessed at any time by means of an inspection opening. The table is to be connected to a Ventilation system provided by the customer.
The Autopsy Table STV 10/850-ROLL-IN model includes the following features:
Center support column with 2 inspection openings
UP / DOWN button for height adjustment by means of an integrated electro mechanical drive
Knee-operated mixing tap for cold and warm water
3 m shower hose with hand Sprinkler
2 splash proof electrical outlets
Regulator valve for integrated sprinkler System
3-piece work top with large waste basin/sieve insert
The safety requirements for drinking water as per DIN 1988 part 4 and EN DIN 1717 are to be provided by the customer
Delivery without Body tray LM 80/100-AL