Wall-mounted bed head unit Bed Head Unit

horizontalmodularfor patient rooms

Overview

• The bed head unit is an aluminum alloy multifunctional equipment belt designed for hospital wards.
• Electrical separation follows the HTM2022 concept with a three-chamber internal structure separating strong electricity, weak electricity and gas pipelines to enhance electrical safety and fire protection.
• Supports integration of power sockets, bedside lamps, switches, medical gas terminals and nurse call systems; configuration adaptable to project requirements.
• Panel and base use a buckle-type (snap-fit) modular structure to simplify installation and maintenance.
• Surface treatments include spraying, anodizing and wood-grain finish; finishes and colors can be customized.
• Typical installation: equipment belt arranged throughout the ward with centerline approximately 1.4 m above floor level.
• Safety measures prevent electric shock in normal and single-fault conditions; options include double or reinforced insulation, SELV components or protective impedance.
• Lighting and electrical accessories: 4W LED fixtures, 5-hole sockets and large plate switches; accessories may be flush-mounted within the panel.
• Standards and testing: complies with GB 50751-2012 and provides GB9706.1-2007 documentation and salt spray test report.

Description (detailed points)

• 1. Material: aluminum alloy; typical dimensions: width ≥ 200 mm, height ≥ 60 mm, wall thickness ≥ 1.3 / 1.5 mm.
• 2. HTM2022-based electrical separation with three dedicated chambers for strong electrical, weak electrical and gas pipelines.
• 3. Multifunctional design supports installation of power sockets, bedside lamps, switches, medical gas outlets and nurse call systems; configurable per project.
• 4. Integration options allow gas terminals, power sockets, lamps and switches within the equipment belt.
• 5. Buckle-type panel and base enable simple and convenient installation and maintenance.
• 6. Surface treatment options: spraying, anodizing, wood-grain; colors and patterns customizable.
• 7. Typical centerline height: 1.4 m above floor level.
• 8. Safety features include prevention of electric shock in normal and single-fault states; available double/reinforced insulation, SELV components or protective impedance for accessible parts.
• 9. Standard lighting: 4W LED fixtures; sockets and switches include 5-hole sockets and large plate switches with flush-mounted option.
• 10. Complies with GB 50751-2012 (Medical Gas Engineering).
• 11. Device with panel adopts a modular integrated structure with a modern appearance.
• 12. Supplied with electrical separation and provides GB9706.1-2007 compliance documentation and salt spray test report.

Specification and dimensions (from product table)
Width: 200 mm
Height: 55 mm
Material: aluminum alloy
Surface treatment: spraying, anodizing, wood-grain; customizable colors and patterns
Features: three-chamber structure realizing separate slots for strong, weak and gas pipelines; buckle-type modular panel and base for simplified installation and maintenance

Technical characteristics

• Material: aluminum alloy
• Declared width: ≥ 200 mm (table: 200 mm)
• Declared height: ≥ 60 mm (table: 55 mm)
• Wall thickness: ≥ 1.3 / 1.5 mm
• Internal structure: three chambers (strong electrical, weak electrical, gas)
• Surface finishes: spraying, anodizing, wood-grain; customizable
• Typical installation center height: 1.4 m above floor
• Lighting: 4W LED fixtures
• Sockets/switches: 5-hole sockets, large plate switches; flush-mounted option
• Mounting: buckle-type modular panel and base for simplified installation and maintenance
• Safety: electrical separation; options for double/reinforced insulation or SELV components; protection against electric shock in normal and single-fault states
• Standards: GB 50751-2012, GB9706.1-2007